Contact Us

Add:No.199, Zhaihou Road, Dongfu Town, Haicang Dist, Xiamen, China

Tel:+86-592-6588375

Fax:+86-592-6588737

Official website: www.xmliteng.com

Video website: www.loader-video.com

E-mail: sales@xmliteng.com

Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory

Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory

Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory

Inquiry

  • Product Details




Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory

The LT23T wheel telehandler has compact structure and small turning radius. It is equipped with the high pressure tubeless engineering tyre, high strength heavy duty drive axle and the self-developed transmission gearbox as well as the vertical middle hinged shaft lifting hydraulic cylinder. Along with the rising of the boom arm, the fork would come out with certain elevation angle for elevating the operating security and reliability of the product under the harsh and heavy load working conditions.
Meanwhile, the wheel telehandler takes usage of the coaxial flow amplifying steering gear and the dual pump confluence and shunt steering priority hydraulic system composed of priority valve and unloading valve. Through optimizing the hydraulic pipeline, the pressure loss of the pipeline can be reduced to get good energy saving effect. The product has novel structure and obtains two utility mode patents.


微信图片_20171017144614.jpg
微信图片_20171017144558.jpg
微信图片_20171017144604.jpg


Performance Features
1. Designed with four-wheel drive mode, the telescopic loader has flexible steering driving ability.
2. For the high distance of the chassis from the ground, it can work under a variety of complex conditions.
3. The large departure angle of the balance weight enables strong grade ability.
4. The product has large power. The optimized working device of single rocker arm Z-form reversal mechanism can guarantee large breakout force and lifting force. The maximum lifting weight of the product can reach 23t.
5. Through finite element analysis and strong design for the key parts, the product has large bearing capacity.
6. The tyre of the wheel telehandler is 26.5-25 in specification with 36PR for front tyre and 28PR for rear tyre. Featuring strong bearing capacity, it is adaptive to poor working conditions.
7. The use of the hydraulic oil cooler keeps good thermal equilibrium of hydraulic system.


Selectable Unit
1. Sinotruk WD615 Engine or Weichai Landking Generation-II Low Speed Engine
2. Cooling or the Heating and Cooling Air Conditioner
3. Special Bucket
4. Tyre Protective Chain


Standard Facility
1. 162kW Turbocharged Engine
2. Air-over-oil Caliper Disc Service Brake System and Pneumatically Controlled Clamp Type Parking Brake System
3. Single-stage 4-element Twin Turbine Torque Converter
4. Standard Tyre with the Specification of 26.5-25-36PR for Front Tyre and 26.5-25-28PR for Rear Tyre
5. Planetary Hydraulic Shift Transmission Gearbox
6. 60 Drive Axle with Four-wheel Drive Mode
7. Standard Boom Arm and Standard Quarry Stone Fork Loading Device


mmexport1509898070880.jpg
mmexport1509898056195.jpg
mmexport1509898060993.jpg
20150308_130115.jpg
20150308_130028.jpg
20150308_130100.jpg


Main technical performances and parameters

Engine

Rated power

175kw

Overall dimensions

Overall length

8600mm

Overall width

3150mm

Overall height

3780mm

Dumping height

3240mm

Specification of tires

26.5-25

Wheel base

3300mm

Tire width

2300mm

Performance parameters of entire machine

Operating weight

23000KGS

Rated loading capacity

23000KGS

Dimensions of fork

1500x280x120mm

Distance of fork

≤740mm

Max. Climbing Gradient

28°

Max. Breakout Force

331KN

Max. Torque

920N.m

Rated speed

2200r/min

Total cycling time

≤6.8s

Hydraulic cycling time

≤12.55s

Travel speed

Forward gear Ⅰ

0-11.5km/h

Forward gear Ⅱ

0-386km/h

Reverse gear Ⅰ

0-16km/h

Liteng Machinery is professional for its high-end products of 23 tons heavy construction forklift loader equipment shovel vehicle, which is high in quality, reliability, strong in durability, and reliable in performance. We are one of the professional Chinese 23 tons heavy construction forklift loader equipment shovel vehicle factory. Welcome to get new loader made in China from us.


Liteng Machinery is professional for its high-end products of Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory, which is high in quality, reliability, strong in durability, and reliable in performance. We are one of the professional Chinese Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory factory. Welcome to get new loader made in China from us.
Hot Tags: Chinese fork lift loader|Chinese forklift payloader|Chinese forklift front end loader|front end loader forks factory
  • Feedback

Contact Us

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML
QR Code
Copyright © Xiamen Liteng Engineering Machinery Co.,Ltd. All rights reserved.